Modern attenuators
-
- Office Gopher
- Posts: 271
- Joined: Tue Jul 06, 2021 12:21 am
- Has thanked: 11 times
- Been thanked: 64 times
Modern attenuators
There is ceratinly a great choice of attenuators these days and I read about people raving at how good they are. Are they really that much better that what was available 10-15 years ago? I have a Weber Mass Lite that is around 10 years old or so and haven't used it in forever. I bought to tame the monsterous River K-Tre I had and I hated it. Could've been user error but I felt like it put a blanket on the tone.
- harddriver
- Grand Poobah
- Posts: 5310
- Joined: Mon Jul 05, 2021 5:03 pm
- Has thanked: 588 times
- Been thanked: 1761 times
Re: Modern attenuators
I have an old THD hotplate and a Rivera Rockcrusher. The Rivera is very wellbuilt it's overbuilt actually but any setting attenuating more that -8DB it starts to affect the tone just the same as the THD. I only use either to make playing my 68 plexi and 72 Superlead tolerable while shaving some volume off, if I use -12DB or more on the either I notice the tone seems to be more affected like less punch and diminished highs but again that's how our ears perceive it so I don't think there is a way around it even if technically the overall sound is 100% identical but just more quiet. So I think the Flecther Munson curves/effect still applies even to modern attenuators even though we would not like it to be the case.
I think one might be better off slaving into a Suhr Reactive load then reamping with a another power amp like a Matrix for lower volume playing. As long as you understand something attenuated -12 to -20 Db just isn't going to have the same audible dynamics because of the Flecther Munson effects.
I think one might be better off slaving into a Suhr Reactive load then reamping with a another power amp like a Matrix for lower volume playing. As long as you understand something attenuated -12 to -20 Db just isn't going to have the same audible dynamics because of the Flecther Munson effects.
-
- Office Gopher
- Posts: 271
- Joined: Tue Jul 06, 2021 12:21 am
- Has thanked: 11 times
- Been thanked: 64 times
- RockyStar
- Grand Poobah
- Posts: 5781
- Joined: Mon Jul 05, 2021 2:01 am
- Has thanked: 1036 times
- Been thanked: 1662 times
Re: Modern attenuators
The modern variants do well.
Fryette Power Station
Boss Tube Amp Expander
Suhr Reactive Load
Fryette Power Station
Boss Tube Amp Expander
Suhr Reactive Load
- lll
- Middle Manager
- Posts: 1706
- Joined: Tue Jul 06, 2021 10:17 pm
- Has thanked: 998 times
- Been thanked: 937 times
Re: Modern attenuators
Semantics here, but the Suhr Reactive Load isn't an attenuator, but a load box.
Some attenuators attenuate and serve as a load box as well (Hot Plate).
I'm not a fan of any attenuators unless I'm just shaving a few dBs off... any more than that, and the tone literally gets compressed (squashed) and loses dynamics.
AFA loadboxes, there is a big tonal difference between reactive (Suhr Reactive Load) and resistive (THD HotPlate).
Some attenuators attenuate and serve as a load box as well (Hot Plate).
I'm not a fan of any attenuators unless I'm just shaving a few dBs off... any more than that, and the tone literally gets compressed (squashed) and loses dynamics.
AFA loadboxes, there is a big tonal difference between reactive (Suhr Reactive Load) and resistive (THD HotPlate).
The Democratic Party is a criminal organization and the enemy within of the United States of America.
- RockyStar
- Grand Poobah
- Posts: 5781
- Joined: Mon Jul 05, 2021 2:01 am
- Has thanked: 1036 times
- Been thanked: 1662 times
Re: Modern attenuators
Ok Smarty Pants...lll wrote: ↑Sat Jan 15, 2022 1:37 am Semantics here, but the Suhr Reactive Load isn't an attenuator, but a load box.
Some attenuators attenuate and serve as a load box as well (Hot Plate).
I'm not a fan of any attenuators unless I'm just shaving a few dBs off... any more than that, and the tone literally gets compressed (squashed) and loses dynamics.
AFA loadboxes, there is a big tonal difference between reactive (Suhr Reactive Load) and resistive (THD HotPlate).
Who is online
Users browsing this forum: No registered users and 4 guests