Teh Snorkler

Post your amp/pedal/guitar/etc builds here
User avatar
lll
Middle Manager
Posts: 1156
Joined: Tue Jul 06, 2021 10:17 pm
Has thanked: 809 times
Been thanked: 664 times

Re: Teh Snorkler

Post by lll »

"Teh Snorkler" ?

Is this some sort of male enhancement machine?

Asking for a friend...
The Democratic Party is a criminal organization and the enemy within of the United States of America.
User avatar
PLX
Executive
Posts: 3785
Joined: Wed Jul 14, 2021 10:46 pm
Location: Bandera, TX
Has thanked: 1248 times
Been thanked: 1600 times

Re: Teh Snorkler

Post by PLX »

lll wrote: Thu Nov 24, 2022 3:48 am "Teh Snorkler" ?

Is this some sort of male enhancement machine?

Asking for a friend...
Image
User avatar
PLX
Executive
Posts: 3785
Joined: Wed Jul 14, 2021 10:46 pm
Location: Bandera, TX
Has thanked: 1248 times
Been thanked: 1600 times

Re: Teh Snorkler

Post by PLX »

Zero Snork Thirty

Image
User avatar
PLX
Executive
Posts: 3785
Joined: Wed Jul 14, 2021 10:46 pm
Location: Bandera, TX
Has thanked: 1248 times
Been thanked: 1600 times

Re: Teh Snorkler

Post by PLX »

Snork - the other white meat..

Image
User avatar
harddriver
Grand Poobah
Posts: 5095
Joined: Mon Jul 05, 2021 5:03 pm
Has thanked: 551 times
Been thanked: 1700 times

Re: Teh Snorkler

Post by harddriver »

Did you drill and stake a new turret layout specifically for the Snork build?
User avatar
PLX
Executive
Posts: 3785
Joined: Wed Jul 14, 2021 10:46 pm
Location: Bandera, TX
Has thanked: 1248 times
Been thanked: 1600 times

Re: Teh Snorkler

Post by PLX »

harddriver wrote: Tue Nov 29, 2022 2:03 am Did you drill and stake a new turret layout specifically for the Snork build?
Naw, I just harvested all the parts from the previous pre-amp build, cleaned the board and started the layout.

I've had to drill a couple of new holes so far, but it's going well.

Since I'm only using two 12AX7's I should have plenty of room. Trying to be as efficient as possible though.

Image
User avatar
PLX
Executive
Posts: 3785
Joined: Wed Jul 14, 2021 10:46 pm
Location: Bandera, TX
Has thanked: 1248 times
Been thanked: 1600 times

Re: Teh Snorkler

Post by PLX »

HD, I'm finally using the components you sent me.

:D
User avatar
harddriver
Grand Poobah
Posts: 5095
Joined: Mon Jul 05, 2021 5:03 pm
Has thanked: 551 times
Been thanked: 1700 times

Re: Teh Snorkler

Post by harddriver »

PLX wrote: Tue Nov 29, 2022 4:15 pm HD, I'm finally using the components you sent me.

:D
I sent you 3 Evox/RIfa's if I remember correctly? No? They should all be in this build! IMHO for the WIMA Boggy sound! ;) :lol:

How did you extend the Evox/RIfa leads?

NICE........................Board's looking good! ;) Your lead dress is looking very neat and orderly!

Can't wait to hear this thing and whole lotta AIC riffs! :D
User avatar
PLX
Executive
Posts: 3785
Joined: Wed Jul 14, 2021 10:46 pm
Location: Bandera, TX
Has thanked: 1248 times
Been thanked: 1600 times

Re: Teh Snorkler

Post by PLX »

harddriver wrote: Tue Nov 29, 2022 5:16 pm I sent you 3 Evox/RIfa's if I remember correctly? No? They should all be in this build! IMHO for the WIMA Boggy sound! ;) :lol:

NICE........................Board's looking good! ;) Your lead dress is looking very neat and orderly!

Can't wait to hear this thing and whole lotta AIC riffs! :D
Yes. The.68µF caps were the only components I am able to use in this circuit.

The Wima caps will be delivered later this week.

If I'm not happy with the tone, I will try rolling different 12AX7 tubes in/out, then perhaps try swapping out some caps.

I just used bits of leads that I had trimmed off other components.. Bent a little hook into one end, crimped onto the leads of the box cap using a very small pair of needle-nose pliers and then applied a drop of hot solder.
User avatar
Ritchie's Party Hat
Recruit
Posts: 84
Joined: Sun Jul 04, 2021 6:37 pm
Has thanked: 62 times
Been thanked: 27 times

Re: Teh Snorkler

Post by Ritchie's Party Hat »

Right. This is for Nuno-tone, right?
Post Reply