Orange Amp-In-A-Box Pedal Project
- PLX
- Executive
- Posts: 4148
- Joined: Wed Jul 14, 2021 10:46 pm
- Location: Bandera, TX
- Has thanked: 1407 times
- Been thanked: 1806 times
- PLX
- Executive
- Posts: 4148
- Joined: Wed Jul 14, 2021 10:46 pm
- Location: Bandera, TX
- Has thanked: 1407 times
- Been thanked: 1806 times
- PLX
- Executive
- Posts: 4148
- Joined: Wed Jul 14, 2021 10:46 pm
- Location: Bandera, TX
- Has thanked: 1407 times
- Been thanked: 1806 times
- PLX
- Executive
- Posts: 4148
- Joined: Wed Jul 14, 2021 10:46 pm
- Location: Bandera, TX
- Has thanked: 1407 times
- Been thanked: 1806 times
- PLX
- Executive
- Posts: 4148
- Joined: Wed Jul 14, 2021 10:46 pm
- Location: Bandera, TX
- Has thanked: 1407 times
- Been thanked: 1806 times
Re: Orange Amp-In-A-Box Pedal Project
I used traditional "Orange Amp" style icons for controls rather than labels. So I'll include this printed legend sheet with the pedal.
- RockyStar
- Grand Poobah
- Posts: 5781
- Joined: Mon Jul 05, 2021 2:01 am
- Has thanked: 1036 times
- Been thanked: 1662 times
- PLX
- Executive
- Posts: 4148
- Joined: Wed Jul 14, 2021 10:46 pm
- Location: Bandera, TX
- Has thanked: 1407 times
- Been thanked: 1806 times
Re: Orange Amp-In-A-Box Pedal Project
Change of plans..
This never happened before, but after allowing the orange paint to cure for 24 hours, I applied one coat of clear coat.
90 seconds later a chemical reaction occurred, and the orange paint wrinkled up and peeled off - as if I has used paint remover.
- PLX
- Executive
- Posts: 4148
- Joined: Wed Jul 14, 2021 10:46 pm
- Location: Bandera, TX
- Has thanked: 1407 times
- Been thanked: 1806 times
Orange Amp-In-A-Box Pedal Project
paint stripped down to bare metal, cleaned with lacquer thinner, 3 coats of Navajo White:
- PLX
- Executive
- Posts: 4148
- Joined: Wed Jul 14, 2021 10:46 pm
- Location: Bandera, TX
- Has thanked: 1407 times
- Been thanked: 1806 times
Re: Orange Amp-In-A-Box Pedal Project
I just looked at the 3 transistors I ordered from MojoTone.com for this project.
They shipped me the wrong parts. Was supposed to be PF5102. I got three 2N5484's instead.
MojoTone said they'd re-ship the correct transistors Tuesday morning.
They shipped me the wrong parts. Was supposed to be PF5102. I got three 2N5484's instead.
MojoTone said they'd re-ship the correct transistors Tuesday morning.
- PLX
- Executive
- Posts: 4148
- Joined: Wed Jul 14, 2021 10:46 pm
- Location: Bandera, TX
- Has thanked: 1407 times
- Been thanked: 1806 times
Re: Orange Amp-In-A-Box Pedal Project
Altered control iconography to match new enclosure color. Applied waterslide decal for faceplate art:
Who is online
Users browsing this forum: No registered users and 1 guest