I grabbed that one off the YouTube.
Univox Uni-Drive UD-50
- PLX
- Executive
- Posts: 4148
- Joined: Wed Jul 14, 2021 10:46 pm
- Location: Bandera, TX
- Has thanked: 1407 times
- Been thanked: 1806 times
-
- Recruit
- Posts: 41
- Joined: Wed Jul 19, 2023 4:05 pm
- Has thanked: 6 times
- Been thanked: 3 times
Re: Univox Uni-Drive UD-50
I know I'm late to this thread but that sounds fucking great!
There's a "tightness" there and then the sustain and all the little nuances bright and clear.
Is it a drive (asking because of gain knob) or just a boost?
My klone doesn't do that.
My SD-1 doesn't do that, well quite like that...
There's a "tightness" there and then the sustain and all the little nuances bright and clear.
Is it a drive (asking because of gain knob) or just a boost?
My klone doesn't do that.
My SD-1 doesn't do that, well quite like that...
- PLX
- Executive
- Posts: 4148
- Joined: Wed Jul 14, 2021 10:46 pm
- Location: Bandera, TX
- Has thanked: 1407 times
- Been thanked: 1806 times
Re: Univox Uni-Drive UD-50
The original device was noting more than a volume pedal.dcburn wrote: ↑Tue Dec 12, 2023 5:42 pm I know I'm late to this thread but that sounds fucking great!
There's a "tightness" there and then the sustain and all the little nuances bright and clear.
Is it a drive (asking because of gain knob) or just a boost?
My klone doesn't do that.
My SD-1 doesn't do that, well quite like that...
It's a clean boost.
-
- Recruit
- Posts: 41
- Joined: Wed Jul 19, 2023 4:05 pm
- Has thanked: 6 times
- Been thanked: 3 times
Re: Univox Uni-Drive UD-50
Sorry for late reply and appreciate the reply.
If you remember me from the other site, i dont get on here unless at work. I had end of year off.
After building my three amps, Ive been all about trying to get my tone just from amp (Metro JTM45) and guitar. Well maybe a little delay...
I have noticed though hitting one of my drives it does get a little tighter and a bit more aggressive.
I was looking at Analogmans Beano and Bad Bob boosts.
I really want to keep the integrity of the amp, so I've tried not using pedals as such.
But there is that looseness...
Thanks for the heads up on the boost PLX.
If you remember me from the other site, i dont get on here unless at work. I had end of year off.
After building my three amps, Ive been all about trying to get my tone just from amp (Metro JTM45) and guitar. Well maybe a little delay...
I have noticed though hitting one of my drives it does get a little tighter and a bit more aggressive.
I was looking at Analogmans Beano and Bad Bob boosts.
I really want to keep the integrity of the amp, so I've tried not using pedals as such.
But there is that looseness...
Thanks for the heads up on the boost PLX.
- lll
- Middle Manager
- Posts: 1706
- Joined: Tue Jul 06, 2021 10:17 pm
- Has thanked: 998 times
- Been thanked: 937 times
Re: Univox Uni-Drive UD-50
Try a simple graphic EQ (6 band, 10 band, etc) pedal out front and sculpt a high pass while leaving the rest of the (higher) freqs flat.
The Democratic Party is a criminal organization and the enemy within of the United States of America.
-
- Recruit
- Posts: 41
- Joined: Wed Jul 19, 2023 4:05 pm
- Has thanked: 6 times
- Been thanked: 3 times
Re: Univox Uni-Drive UD-50
After replying to PLX yesterday, I got off my ass and did some mechanic work like my employer expects me too and for some reason started thinking. Odd, I know...
I mention PLX because after replying to him I started thinking he would just tell me to build my own rather than buy a "production" boost.
I mention PLX because after replying to him I started thinking he would just tell me to build my own rather than buy a "production" boost.
Who is online
Users browsing this forum: No registered users and 0 guests